To add a new penalty to a registered car or driver, you have to simply follow the steps are described below.
Step 1:
Select the penalty receiver type by clicking the corresponding check box.
Step 2:
Select a registered car or driver from the corresponding table. Once selected, all relevant information (penalty history, car information, driver information) is loaded to the frame's forms.
Step 3:
Go to the penalty registration form and fill in the required information regarding the specific penalty. Alternatively, you can chose one of the default penalties stored in the Default Penalties table .
Step 4:
Click on the "Save" icon to store the penalty. If you want to impose a penalty to more than one cars or drivers, you have just to select them from the tables and click on the "Save penalty from selected table fields"
Step 5:
The new penalty has been registered successfully.
When a penalty is active, the notification icon appears on the driver's or car's form while the form stores the data of the punished driver or car (usually after a specific selection).
to store the penalty. If you want to impose a penalty to more than one cars or drivers, you have just to select them from the tables and click on the "Save penalty from selected table fields" 
appears on the driver's or car's form while the form stores the data of the punished driver or car (usually after a specific selection). 